BMW Seeking Silent Cooling Technologies For Fast Charging Of Electric Vehicles

BMW is seeking alternative cooling technologies for vehicle batteries to further improve peak cooling capacity during fast charging while reducing cooling components’ vibration and noise emission.

Electronic-Cooling-Compressor

Solutions that meet the need criteria will be invited to work with BMW to evaluate and develop the idea.

Future electric vehicles will be charged much faster than today. Even during longer trips recharging your car has to be fast and convenient. Technically this creates more heat to be dissipated within a short amount of time.

BMW is, therefore, looking for innovative cooling technologies for fast charging applications that can cope with heat dissipation without exceeding current noise levels while operating.

Key success criteria:

– Cooling technology working with temperature gradients between battery surface and ambient temperature, operating temperature range -20 °C to +45 °C.

– Scalable for future battery capacities and heat dissipation. As a starting point for the challenge, solutions should assume needing a cooling power > 20 kW during the fast charging with 200-300 kW.

– Low noise production, not beyond 35 dB(A).

– Power density: realizable thermal performance compared to the component volume.
– Peak cooling performance is not required 24/7. Instead the proposed solution has to operate only within the limited time period of fast charging.
– The vehicle will not be moving while charging, so there is no circulating air for cooling available. The heat flux to ambient air must also be implemented by the system.

Possible Approaches

– Both early-stage solutions and mature solutions, mature solutions > TRL 5 are preferred (Integrated components demonstrated in a laboratory environment)
– Technologies may refer to, but are not limited to: magnetocaloric technologies, electrochemical cooling, schukey machine applications, thermoacoustic cooling, absorption cooling
– The use of phase change materials (vapor cooling)
– Innovative compression methods
– Cooling medium is not specified

Approaches not of Interest

– Passive cooling technologies requiring high temperature gradients between battery surface and ambient temperature
– Technologies harmful to the environment
– Technologies with high service and maintenance requirements

BMW suggest you include the following:

– Describe the technology
– How the technology is relevant to our brands (specific or in general)
– Level of maturity of the technology (development stage or just a proposal)
– How adaptable is the technology, can it be used in a wide range of scenarios?
– Background information on the people involved in the proposal

Remember….. Don’t send anything that could be considered confidential at this point.

Due date is March-8-2019. Applicants should apply through NineSights.

Comments are closed



Photo Gallery

Log in | © Copyright 2012 - TechReleased Inc. All Rights Reserved