Tips and Tricks to Help Your Car Pass it’s MOT

Many people get a sense of impending doom when they realise it’s time for their MOT, however; you don’t need to be a mechanic to prepare your car for its checkup. By simply checking the essentials and putting in a little effort, you can ensure your car passes. About 40% of cars fail their MOT on the first attempt, and not because of a major mechanical defect either. It’s usually due to small faults that could have simply been fixed by you beforehand!

Tips and Tricks to Help Your CarPre MOT Tips and Tricks

  • Check your lights and renew any failed bulbs. Make sure you check the headlights, sidelights, indicators, brake lights, number plate, reverse lights, rear fog lights, and hazards.
  • Clean your car thoroughly, inside and out. Some places will refuse to test your car if it’s too dirty.
  • Make sure there are no cracks or large chips in the windscreen that fall within your view. Your car will fail if it has chips over 10mm in the driver’s line of sight. Any scratching that limits your vision will also affect your result. Have small stone chips fixed ASAP to avoid getting a totally new windscreen.
  • Make sure your tyres reach the minimum tread depth of 1.6mm. Also check them for any damage, like splits in the tread, bulges, cuts, missing nuts, and anything else that could potentially be dangerous.
  • It might sound obvious – but make sure your horn works! It needs to be loud enough to warn other motorists and pedestrians should you need to.
  • Fit some new wiper blades and top up your screen wash reservoir. The wiper blades should be secure, and work effectively to clear the screen effectively. Make sure the rubber on them is not split or perished. You can usually find all kinds of places that will do things like this for you at a reasonable price, whether you’re searching for car repair in Edmonton or Birmingham.
  • Never wait until the very last minute to apply for your MOT. You can submit your car up to a month before your old certificate runs out.
  • Make sure you shop around for the best deal, whether that’s a free retest or reduced fee if your car fails.
  • You have the option to watch and learn as your MOT takes place. This is a good idea if you’re having it done as a pre purchase inspection.
  • Make sure you read any comments made about your car. Regardless of if it passes or fails, you might have some advisory notices that will need attention sooner or later.
  • Your fuel cap needs to lock securely in place and the seal inside the cap should not be split. Make sure you have enough fuel in the car to get it through the test!
  • Your exhaust should be held on securely and not have any holes other than the obvious one. If it sounds louder than normal, there could be a hole in it.
  • Your mirrors should all be secure.

By carefully making these standard checks before taking your car for MOT, you can save yourself a lot of money on parts and labour, as well as precious time. Let us know how you got on in the comments!

Comments are closed

Photo Gallery

Log in | © Copyright 2012 - AutoReleased Inc. All Rights Reserved Hosted by Appliedhost